| Customization: | Available |
|---|---|
| Standard: | AISI, JIS, ASTM, DIN, BS, GB |
| Certification: | ABS, RoHS |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
size:10*10-150*150(mm)
length:3-12m (canbe customized)
Size Tolerance:
Length tolerance: +50mm/-0mm
Straightness: max 3mm/m
1.Both end of each bar must be cut.
2.Ladle furnanced and vacuum de-gassed
3.Show heat No. on each bar
4.Surface condition the surface of the hot rolled square bar shall befree cracks, scar and wrinkles that affect the use of the billets. In case there is the above-mentioned defect, it shall be remove.
5.The mill test certificate shall show the chemical composition, and it is guaranteed that the chemical composition shall be within the limit stipulated in the contract
3.Application for square bars
1): Can be used in many fields such as building, automobile, shipbuilding, petrochemical, machinery, medicine, food, electric power, energy, space, building and decoration, etc.
2): Can be made into mould template, mortise pin, column
3): This kind of steel have good mechanical property, is widely used in structural parts which may support stress alternation, especially made into some connecting rods, bolts, wheel gear...
4): This kind of steel is the most common blanks and materials of shaft parts.
4.Chemical composition
| Grade | C | Si | Mn | P | S | Cr | Ni |
| 1020 | 0.17 | 0.17 | 0.35 | ≤0.03 | ≤0.03 | ≤0.25 | ≤0.30 |
| 0.23 | 0.37 | 0.65 | |||||
| 1045 | 0.42 | 0.17 | 0.5 | ≤0.03 | ≤0.03 | ≤0.25 | ≤0.30 |
| 0.5 | 0.37 | 0.8 |
5.Physical Property
| Grades | 1020 | 1045 |
| Hardness | 156HB | 229HB |
| Tensile strength | 410MPA | 600MPA |
| Yield strength | 245MPA | 355MPA |
| Elogation | 25% | 16% |
| Reduction of area | 55% | 40% |
| AKV(impact value) | 54J | 39J |
6.MOQ:5tons
7.Delivery Time:7-30 days upon to your order details.
8.Payment Term: TT,LC,West Union and so on....
){kind=link}